EM3270 Manual

EM3270 Emulation With a Kanji Host

Tandem EM3270 Manual—110332 B-5

Fujitsu Host to Tandem/IBM Terminal Translation

For terminal emulation, the Fujitsu 66xx commands issued by the Fujitsu host

application are handled as described in Table B-8.

The WCC character that follows the Write, Erase/Write, and Erase/Write Alternate

commands is translated as described in Table B-9.

Table B-8. Fujitsu 66xx Command Translation

Command EM3270 Emulator Action

Erase All Unprotected Fully supported.

Write Fully supported. See specific handling of buffers order and

WCC bits below.

Erase/Write Fully supported.

Erase/Write Alternate Partially supported. This command is handled the same as

Erase/Write. The alternate screen sizes are not supported.

Read Buffer Fully supported.

Read Modified Fully supported.

Read Modified All Fully supported.

Table B-9. Translation of Fujitsu 66xx WCC Characters

WCC Bit EM3270 Emulator Action

Bit 0 - Unused Ignored.

Bit 1 - WCC Reset Bit Not supported.

Bits 2-3 - Printout Format Supported.

Bit 4 - Start Printer Supported.

Bit 5 - Sound Alarm Supported.

Bit 6 - Keyboard Restore Supported.

Bit 7 - Reset MDT Bits Supported.