EM3270 Manual

EMCOM Messages
D-2 110332—Tandem EM3270 Manual
EMCOM Messages
ERROR - *1012* INVALID PRIORITY
A priority value of less than 1 or greater than 199 was specified.
ERROR - *1013* MISSING PRIORITY
A priority value was expected and not found.
ERROR - *1014* FILE NAME EXPECTED
A file name was expected and not found.
ERROR - *1015* MISSING SET PARAMETER
A keyword or parameter was expected and not found.
ERROR - *1016* UNABLE TO OPEN EM3270 PROCESS - ERROR:
file-error-number
EMCOM failed to open the specified the EM3270 emulator process.
ERROR - *1017* EMCOM/EM3270 PROCESS I/O ERROR: file-error-number
An error was detected on a message between EMCOM and the EM3270 emulator.
This error could be caused by running incompatible versions of EMCOM and the
EM3270 emulator.
ERROR - *1018* NEWPROCESS ERROR: file-error-number
An error was encountered during an attempt to start an EM3270 emulator process.
(See NonStop Kernel Operating System Programming Manual.)
STATUS - *1019* PROCESS CREATED cpu:PIN
EMCOM has successfully created an EM3270 emulator process.
ERROR - *1020* LOG FILE #1 ERROR: file-error-number
A file-system error occurred with the LOG1 file.
ERROR - *1021* LOG FILE #2 ERROR: file-error-number
A file-system error occurred with the LOG2 file.
WARN - *1022* VERSION MISMATCH EM3270= version, EMCOM= version
The version numbers of EMCOM and EM3270 emulator are different.
STATUS - *1023* PROCESS STOPPED
Acknowledgment that the EM3270 emulator process has stopped.
STATUS - *1024* SHUTDOWN IN PROCESS
Acknowledgment that the EM3270 emulator process has begun to shut down.
ERROR - *1025* TERMINAL NOT STARTED - ERROR: file-error-number
A file-system error occurred during an attempt to start a terminal.