EM3270 Manual

EMCOM Messages
D-4 110332—Tandem EM3270 Manual
EMCOM Messages
WARN - *1040* TEXT PARAMETER TRUNCATED
Text string too long.
ERROR - *1041* MISSING OR INVALID TEXT PARAMETER
Invalid text string was specified or omitted entirely.
ERROR - *1042* INVALID TIMEOUT VALUE
The timeout parameter must fall in the range of 0 to 32767.
ERROR - *1043* TERMINAL NOT STOPPED
A terminal must be stopped before it can be deleted.
ERROR - *1044* APPLID NOT SPECIFIED
The APPLID parameter must be specified if LOGMODE or DATA is specified.
ERROR - *1046* TASK NUMBER OR TERMINAL NAME EXPECTED
Neither a task number nor a terminal name was specified.
ERROR - *1047* INVALID TERMINAL DEVICE
The terminal device that the user attempted to add was not a valid page mode
terminal, AM6520 subdevice, X25AM subdevice, or process. Disk files can be
specified only for printer emulation.
ERROR - *1050* MISSING OR INVALID READTRSIZE VALUE
A READTRSIZE value was not found or invalid. Values from 1000 to 4095 are
accepted.
ERROR - *1051* INVALID TERMINAL NAME
A terminal name was improperly specified.
ERROR - *1052* HOST ACCESS FILE NOT SPECIFIED
An ADD command was attempted when a SET HOST command had not been
issued.
STATUS - *1053* PROCESS ALTERED
An EM3270 emulator process parameter has been altered.
STATUS - *1054* LOG # log SWITCHED
A new log file has been opened for the indicated log file.
STATUS - *1055* LOG # log CLOSED
The indicated log file has been closed.
ERROR - *1056* NEW LOG # log NOT OPENED - ERROR: error-number
An error occurred during an attempt to open a new log file.