EM3270 Manual

1: ZEM3-EVT-BAD-ADDR
J-8 110332—Tandem EM3270 Manual
Event Management Service
1: ZEM3-EVT-BAD-ADDR
An out-of-range buffer address was detected in a data stream from an IBM or Fujitsu
host or from Pathway in 3270 mode.
Probable Cause
Probably indicates an incorrect configuration or a programming error in the offending
application.
Recommended Action
If the problem persists, an EM3270 trace should be taken of the erroneous data stream.
2: ZEM3-EVT-BAD-BIND
A BIND RU was received from an IBM or Fujitsu host that has an out-of-range value in
one of its fields.
Probable Cause
The most likely cause of this event is incorrect line or LU configuration on the host.
Unconditional Tokens Token Type
ZEMS-TKN-EVENTNUMBER ZEM3-EVT-BAD-ADDR
ZEMS-TKN-SUBJECT-MARK
ZCOM-TKN-SUBJ-PROC <1> process-name
ZEMS-TKN-EMPHASIS ZSPI-VAL-FALSE
ZEMS-TKN-CONSOLE-PRINT ZSPI-VAL-TRUE
ZEM3-TKN-TASKID <2> task-number
Event-Message Text
<1>: Buffer address violation task #<2>
Unconditional Tokens Token Type
ZEMS-TKN-EVENTNUMBER ZEM3-EVT-BAD-BIND
ZEMS-TKN-SUBJECT-MARK
ZCOM-TKN-SUBJ-PROC <1> process-name
ZEMS-TKN-EMPHASIS ZSPI-VAL-FALSE
ZEMS-TKN-CONSOLE-PRINT ZSPI-VAL-TRUE
ZEM3-TKN-BIND-FIELD <2> BIND-field
ZEM3-TKN-TASKID <3> task-number
Event-Message Text
<1>: BIND Rejected - <2> field task #<3>