EM3270 Manual

5: ZEM3-EVT-HOST-OPENED
J-10 110332—Tandem EM3270 Manual
Event Management Service
Probable Cause
An incorrect host file name was specified or the specified device was incorrectly
configured.
Recommended Action
Review the configuration of the EM3270 emulator.
5: ZEM3-EVT-HOST-OPENED
A host subdevice was successfully opened.
Probable Cause
This is a normal status message issued if the LOGOPENS parameter is set to ON.
Recommended Action
This event is informational only; no action is required.
6: ZEM3-EVT-MBCS-ERR
An multiple-byte character set (MBCS) conversion error has been detected.
Unconditional Tokens Token Type
ZEMS-TKN-EVENTNUMBER ZEM3-EVT-HOST-OPENED
ZEMS-TKN-SUBJECT-MARK
ZCOM-TKN-SUBJ-PROC <1> process-name
ZEMS-TKN-EMPHASIS ZSPI-VAL-FALSE
ZEMS-TKN-CONSOLE-PRINT ZSPI-VAL-TRUE
ZCMK-TKN-XFNAME <2> host-subdevice-name
ZEM3-TKN-TASKID <3> task-number
Event-Message Text
<1>: Opened host: <2> Task #<3>
Unconditional Tokens Token Type
ZEMS-TKN-EVENTNUMBER ZEM3-EVT-MBCS-ERR
ZEMS-TKN-SUBJECT-MARK
ZCOM-TKN-SUBJ-PROC <1> process-name
ZEMS-TKN-EMPHASIS ZSPI-VAL-FALSE
ZEMS-TKN-CONSOLE-PRINT ZSPI-VAL-TRUE
ZEM3-TKN-MBCS-ERROR <2> MBCS-conversion-error
ZEM3-TKN-TASKID <3> task-number