EM3270 Manual

Event Management Service
Tandem EM3270 Manual—110332 J-13
11: ZEM3-EVT-TASK-OPENED
10: ZEM3-EVT-TASK-FAULT
A task has terminated due to the indicated fault. If the RESTART parameter is set to
ON, the task will be restarted.
Probable Cause
The indicated task experienced the specified fault, causing the task to be stopped.
Recommended Action
Dependent upon the type of fault.
11: ZEM3-EVT-TASK-OPENED
A task was opened by a Tandem-based application process.
Probable Cause
A Tandem application open has been received.
Unconditional Tokens Token Type
ZEMS-TKN-EVENTNUMBER ZEM3-EVT-TASK-FAULT
ZEMS-TKN-SUBJECT-MARK
ZCOM-TKN-SUBJ-PROC <1> process-name
ZEMS-TKN-EMPHASIS ZSPI-VAL-FALSE
ZEMS-TKN-CONSOLE-PRINT ZSPI-VAL-TRUE
ZEM3-TKN-TASKID <2> task-number
ZCMK-TKN-XFNAME <3> terminal-name
ZEM3-TKN-FAULT-CODE <4> fault-number
ZGRD-TKN-PREGISTER <5> P-Register
Event-Message Text
<1>: Fatal error: task #<2> - term: <3> fault #<4> P=<5>
Unconditional Tokens Token Type
ZEMS-TKN-EVENTNUMBER ZEM3-EVT-TASK-OPENED
ZEMS-TKN-SUBJECT-MARK
ZCOM-TKN-SUBJ-PROC <1> process-name
ZEMS-TKN-EMPHASIS ZSPI-VAL-FALSE
ZEMS-TKN-CONSOLE-PRINT ZSPI-VAL-TRUE
ZEM3-TKN-TASKID <2> task-number
ZCMK-TKN-XPNAME <3> process-name
ZCMK-TKN-XFNAME <4> terminal-name
Event-Message Text
<1>: Task #<2> opened by <3> term: <4>