EM3270 Manual

Tandem EM3270 Manual—110332 K-1
K
Sample Host Configurations
This appendix lists sample configurations for three common hosts using:
•
SNAX/CDF
•
SNAX/XF
•
TR3271
•
SNAX/XF for IBM 5250
SNAX/CDF Configuration
This section lists a sample configuration for a host using SNAX/CDF. The SNAX/CDF
process is started with the following command:
CDFOBJ/NAME $M11,PRI 150,SWAP $DSV,NOWAIT,CPU 9/8, &
NETNAME M11, &
SWAPVOL $KEEPOFF, &
COLLECTOR, &
HOSTSA 11, &
MAXSUBA 32
The SNAX/CDF process is configured with SCF using the following commands:
ASSUME $M11 TIMEOUT -1
ADD ENTRY LOG1.EM3270, TYPE %H01, &
FMPROF %H03,&
TSPROF %H03,&
PRIPROT %HB1,&
SECPROT %H90,&
COMPROT %H3080,&
COS APPL1, RUSIZES %H8587,&
PSERVIC %H020000000000185000007E00, &
TBLTYPE LOGMODE
ADD ENTRY COS.APPL1,TBLTYPE COS, &
VR ((7,2),(7,1),(7,0), &
(6,2),(6,1),(6,0), &
(5,2),(5,1),(5,0), &
(4,2),(4,1),(4,0), &
(3,2),(3,1),(3,0), &
(2,2),(2,1),(2,0), &
(1,2),(1,1),(1,0), &
(0,2),(0,1),(0,0))
ADD PATH DESTSA12, ER1 (12,1), VR1 1, ER2 (12,2), VR2 2
ADD PATH DESTSA13, ER0 (12,1), VR0 0, ER1 (12,2), VR1 1
ADD LINE LINK1, TNDM $SDLC6
ADD PU PU1, LINE LINK1, TGN 1, SUBAREA 12 ,PUTYPE 4