EM3270 Manual

Sample Host Configurations

Tandem EM3270 Manual—110332 K-3

SNAX/XF Configuration

This section lists a sample configuration for a host using SNAX/XF. SNAX/XF is

configured with SCF using the following commands:

ADD LINE $SNAS2,STATION SECONDARY,CHARACTERSET EBCDIC,&

MAXLUS 40

ADD PU $SNAS2.#PU1,TYPE (13,2),RECSIZE 265,MAXLUS 40,&

ADDRESS 199

ADD LU $SNAS2.#LU1,TYPE (14,0),PUNAME #PU1,RECSIZE 1024 &

,PROTOCOL SNALU,ADDRESS 1

ADD LU $SNAS2.#LU2,TYPE (14,0),PUNAME #PU1,RECSIZE 1024 &

,PROTOCOL SNALU,ADDRESS 2

ADD LU $SNAS2.#LU3,TYPE (14,0),PUNAME #PU1,RECSIZE 1024 &

,PROTOCOL SNALU,ADDRESS 3

START LINE $SNAS2,SUB ALL

The EM3270 process is configured and started using the following EMCOM commands:

ASSUME PROCESS

SET PROCID $EMDL

SET LOG2 $S.#EMLOG1

START

ASSUME DEVICE

SET DEVTYPE CRT

SET HOST $SNAS2.#LU1

ADD $ATP.#T1 -- CRT1

SET HOST $SNAS2.#LU2

ADD $ATP.#T2 -- CRT2

SET DEVTYPE PRINTER

SET HOST $SNAS2.#LU3

ADD $S.#PRT -- PRINTER

START *

Note. Any of the configured LUs can be used for LU type 1, 2, or 3 sessions. Thus the

configuration for a SNAX/XF LU is the same whether it is to handle a CRT or a printer session.