EM3270 Manual

R
Index-8 110332—Tandem EM3270 Manual
Index
PRTMODE DEVICE parameter
SET command 4-21
R
Read Buffer Fujitsu command B-2, B-5,
B-8
Read Buffer IBM command A-2, A-5
Read Modified All IBM command A-2, A-5
Read Modified Fujitsu command B-2, B-5,
B-8
Read Modified IBM command A-2, A-5
READTRSIZE parameter
ALTER command 4-5
READTRSIZE PROCESS parameter
SET command 4-27
Recovery 1-11
Repeat to address (RA) A-3
Requirements
application 1-7
RESET command 4-3, 4-14
RESETMDTS DEVICE parameter
SET command 4-22
Restart 1-11
RESTARTING message
STATUS command 4-33
Right margin (RM) A-6
RUGATHER parameter
ALTER command 4-5
RUGATHER PROCESS parameter
SET command 4-27
RUN command 3-3, 3-7, 4-3, 4-15
S
Screen print 1-3
Seconds parameter
PAUSE command 4-14
SECUREDATA DEVICE parameter
SET command 4-22
SECURITY parameter 3-5
SECURITY PROCESS parameter
SET command 4-27
Select IBM command A-2, A-5
Sense IBM command A-2, A-5
Session
dual-application example 3-7
single-application example 3-3
termination 3-1, 3-3
Set attribute (SA) A-3, A-7
Set buffer address (SBA) A-3
SET command 3-3, 4-3, 4-16
Set horizontal format (SHF) A-7
Set line density (SLD) A-8
Set vertical format (SVF) A-8
SHIELD option 1-11
SHIELD parameter
ALTER command 4-5
SHIELD PROCESS parameter
SET command 4-27
SHOW command 3-3, 4-3, 4-29
SHUTDOWN message
STATUS command 4-34
Single-byte character set B-4
SNA
host connections 1-4
mode 1-8
support 1-3
SNALOGON DEVICE parameter
SET command 4-22
SNAX/APN
add objects 3-1
SNAX/CDF
add objects 3-1
SNAX/XF
add subdevices 3-1
Spooler
printer access 3-10
START command 3-5, 4-3, 4-30
Start field extended order (SFE) E-2