EM3270 Manual

SET Command
4-16 110332—Tandem EM3270 Manual
EM3270 Emulator Command Set
Examples
RUN \TNSII.$TR3271.#IMS1 single-application session
RUN $TR.#AP1,LINK ON dual-application session
RUN , LINK IBM3270 single Tandem 3270 application
session
RUNT $SNAS1.#LU1 start a trace for the session
Messages
1004, 1006, 1008, 1014, 1025, 1033, 1035, 1039, 1058, and 1091.
SET Command
The SET command establishes values of parameters for the EM3270 emulator terminals
and printers. All file-name parameters can be fully qualified network addresses.
object-type
identifies the object to be set. It can be one of the following:
DEVICE
PROCESS
parameter-spec
indicates what is to be set.
The parameter-spec for a DEVICE object is shown below. You must specify one of
the following parameters:
ACCESSPOINT file-name
ALIAS[n] text
ALIASMODE { NO | ONLY | BOTH }
AUTOSWITCH { ON | OFF }
BLANKFIELD { EMPTY | SINGLE | FULL }
BLANKONLY { ON | OFF }
BRACKET { ON | OFF }
COLOR { ON | OFF | EXTENDED }
CPRINTER file-name
DEVTYPE { CRT | PRINTER }
ENDFF { ON | OFF }
EOFTEXT “text”
HIDDEN { ON | OFF }
HOST[n] file-name
HOSTDBCS[n] { IBMKANJI | IBMMIXED | JEFKANJI | HANGUL | NONE
}
HOSTCSET[n] { EBCDIC | KATAKANA }
HUNT { ON | OFF }
JEF2EXT { ON | OFF }
LIKE file-name
LINK { ON | OFF | OPTIONAL | IBM3270 }
LOGOFFSTOP { ON | OFF }
SET object-type parameter-spec