EMS FastStart Manual

EMS FastStart Messages
EMS FastStart Manual–133701
A-4
** Error 59 ** The ZSPIDEF-SUBVOL parameter is invalid.
Probable cause:
One of the following files: ZEMSTACL, ZEMSTAL, ZEMSDDL, ZSPIDDL,
ZSPITACL, or ZSPITAL was not validated by EMS FastStart because of the
following reason: The file <filename> does not exist.
Recommended action:
Please correct the ZSPIDEF-SUBVOL parameter to point to the right
location.
** Error 60 ** The USER-SUBVOL parameter is invalid.
Probable cause:
The USER-SUBVOL parameter is invalid or specifies a non-existent volume or
is equal to the EMSFS-SUBVOL.
Recommended action:
Please correct the USER-SUBVOL parameter in the ACF.
** Error 61 ** The USER-SUBVOL-FILES-PREFIX parameter is invalid.
Probable cause:
The USER-SUBVOL-FILES-PREFIX parameter is invalid. It should be exactly 4
characters long and start with an alphabetic character (e.g. APP1).
Recommended action:
Please correct the USER-SUBVOL-FILES-PREFIX parameter in the ACF.
** Error 62 ** The USER-VARIABLES-PREFIX parameter is invalid.
Probable cause:
It should be exactly 4 characters long and start with an alphabetic
character(e.g. APPL).
Recommended action:
Please correct the USER-VARIABLES-PREFIX parameter in the ACF.
** Error 63 ** The APPLICATION-SSID-OWNER parameter is invalid.
Probable cause:
It should be a valid subsystem identifier as specified by DSM.
Recommended action:
Please correct the APPLICATION-SSID-OWNER parameter in the ACF.