EMS Manual

Procedure Calls for Standard Events
EMS Manual—426909-005
11-9
EMS_OBJ_UNAVAIL_EVT_BLD_ Procedure
ZEMS-VAL-INTERNAL-FAILED
ZEMS-VAL-REASON-UNKNOWN
Users can also enter their own defined values.
Subject token ID input
INT(32):value
is the token code of the subject of this event message.
Subject value input
STRING .EXT:ref:*
is the value of the subject to be added to the event message.
Subject length input
INT:value
if present, is the length, in bytes, of the Subject value. This parameter is ignored
unless the Subject token ID is defined as a variable-length token. For more
information, see Considerations on page 11-11.
Subject SSID input
INT .EXT:ref:6
if present, is the ID of the subsystem to which the Subject token ID belongs.
If not present or the value is all zeros, the default SSID (specified in SSID) is
assumed. In this case, the Subject SSID is not added to the event buffer.
Underlying object name input
STRING .EXT:ref:*
if present, is the name of the lower-level object whose failure caused the object
reported in the subject of this event to go out of service. This parameter is used
only if the Change reason parameter has value ZEMS-VAL-UNDERLYING-
FAILED. Otherwise, the parameter is ignored.
If present and Underlying object name length is not zero, Underlying
object name is added to the event buffer. Otherwise, Underlying object
name is not added to the event buffer.
Underlying object name length input
INT:value
if present, is the length, in bytes, of the underlying object name.
If not present or the value is zero, Underlying object name is not added to the
event buffer.