EMS Manual

EMS Programs
EMS Manual—426909-005
13-19
Definition of Terms
Example 13-2 shows the alternate collector status display produced by EMSCINFO in
response to the command “EMSCINFO $ACOL,” without the DETAIL option specified.
The EMSCINFO display for an alternate collector differs from the display for the
primary collector in these ways:

The values of POOLPAGES and REPLYAFTERWRITE are displayed.

No compatibility distributor information is displayed.
Definition of Terms
The terms in these two examples are described in the order they appear in each figure:
Example 13-2. EMSCINFO Alternate Collector Display (No DETAIL Parameter)
EMSCINFO - T9631D31 - (03APR95)
Collector = $ACOL, Priority = 140
Primary CPU = 7
Current Logging Error = 012
Current Log File = $PUBS.LDHMISC.ZZEV0000
*** Switching to next file ***
Default Log File = $PUBS.LDHMISC.ZZEV0000
Primary Extent = 20, Secondary Extent = 100
ROTATEFILES = ON, MAXFILE = 4
REFRESH = ON, BUFFERED = ON
SECURITY = COOO, POOLPAGES = 64
REPLYAFTERWRITE = OFF BLOCKING = ON
Events Received = 0, Events Logged = 0
Events Discarded = 0
OPENS Received = 2, CLOSES Received = 1
FILE Switches = 0, Unrcv Disk Errors = 1
Invalid Events = 0, Buffer Failures = 0
SUPPRESS = OFF, FILTER = ON
Term Description (page 1 of 4)
Collector
Name of the collector.
Priority
Current execution priority of the collector.
Primary CPU
Number of the CPU in which the primary process for the
collector is running.
Backup CPU
Number of the CPU in which the backup process for the
collector is running.
Disk Logging
Active
Displayed if there is no current logging error condition.
Current Logging
Error = error
Displays the error number of a logging error encountered during
a logging operation, if such a condition exists. Logging errors are
either disk failures or operational errors. For a description of
operational errors, see Unrcv Disk Errors
on page 13-21.
Current Log File
File name of the current log file.