EMS Manual

EMS Programs
EMS Manual—426909-005
13-22
EMSCINFO Display Examples (With DETAIL
Option)
EMSCINFO Display Examples (With DETAIL Option)
Example 13-3 is an example of the EMSCINFO display for a primary collector when
the DETAIL option is included in the EMSCINFO command line. It shows both the
primary collector’s current BDS configuration data information and the PLF data
information. In this example, SUPPRESS (BDS) is set to ON, and FILTER (pre-log
filtration) is set to OFF.
Console Name
Name of the operator console to which the compatibility
distributor sends event messages. If different from the default
console name, the console was selected after SYSGEN using
one of:

The PUP CONSOLE command (on a D-series RVU).

The EMSCCTRL utility (keyword TEXTOUT); see
EMSCCTRL—Control Collector Utility
on page 13-9.

The EMS CONTROL command (token ZEMS-MAP-COL-
CONTROL-CDIST, field ZCOL-CDIST-TEXTOUT-SET); see
Section 17, Distributor Commands and Responses
.
Console Error
Code
If present, denotes an error that occurred when the compatibility
distributor tried to send an event message to the console.
Console User Name
If present, is the user ID that the compatibility distributor uses to
access the console.
Default Console
Name
Name of the default operator console, selected during system
load, to which the compatibility distributor sends event
messages. If this has been superseded, look for the current
name in the Console Name field.
Term Description (page 4 of 4)