EMS Manual

EMS Programs
EMS Manual—426909-005
13-41
Startup Error Messages
Recovery. If the distributor fails to start up, fix the specified problem with the collector.
Cause. The targeted textout destination cannot be opened by the distributor.
Effect. The distributor fails to start up.
Recovery. Fix the problem with the specified textout.
Cause. A comma required by syntax has been omitted.
Effect. The distributor fails to startup.
Recovery. Check your command syntax, and that all required commas are present.
Cause. The time or date is not formatted properly.
Effect. The distributor fails to start up.
Recovery. Check that the time and date are formatted correctly. Do not use either
brackets or braces in the date or time.
Cause. The specified destination for a routing distributor cannot be accessed.
Effect. The distributor fails to start up.
Recovery. Check the specified destination and filter file.
Cause. One of the stated options was specified for a forwarding or consumer
distributor, which is not allowed.
Effect. The distributor fails to start up.
Recovery. Only use DUMP, WAIT, INDENT, or GMT with a printing distributor.
Cause. More than one burst filter is specified, which is not allowed.
Can’t open textout textout-name, error error-number
Comma missing
Date/time format error
{ Expecting: [H]H:MM[:SS] }
{ Expecting: YYYY-[M]M-[D]D [[H]H:MM[:SS]] }
{ Expecting: MMM [D]D YYYY [[H]H:MM[:SS]] }
{ Expecting: [D]D MMM YYYY [[H]H:MM[:SS]] }
DESTINATION allocation problem. Filter file: file-name
DUMP/WAIT/INDENT/GMT only allowed for printing distributor
Duplicate burst filter: filter-name