EMS Manual

EMS Programs
EMS Manual—426909-005
13-43
Startup Error Messages
Recovery. Specify STOP EOF.
Cause. The specified filterfile cannot be accessed.
Effect. The distributor fails to start up.
Recovery. Check the specified filterfile error.
Cause. The specified filterfile cannot be read.
Effect. The distributor fails to start up.
Recovery. Check the specified filterfile error.
Cause. Resources for the specified filter cannot be allocated.
Effect. The distributor fails to start up.
Recovery. Reduce the number of filters.
Cause. The format of the specified filter is invalid. The error and file are specified in
the message.
Effect. The distributor fails to start up.
Recovery. Check that the filter is valid and correctly referenced in your command.
Cause. The specified filter requires SPI parameters that were not provided.
Effect. The distributor fails to start up.
Recovery. Filters that require SPI parameters cannot be specified in the RUN
command. Filters of this type can only be added using a SPI command.
Cause. The specified filter table source file cannot be converted because of the
indicated error.
Filterfile problem. Error: error-number, File: file-name
Filterfile read error: error-number, File: file-name
Filter allocation problem. File: file-name
Filter format invalid. Error: error-number, File: file-name
Filter requires parameters; must use SPI
Filter table conversion error: error-number, File: file-name
{ Detail error: detail-error-number }
{ Line# in table: line-number }
{ Column in table: column-number }