EMS Manual

Collector Commands and Responses
EMS Manual—426909-005
19-38
CONTROL Command (ZEMS-CMD-CONTROL)
ZCOL-PROTECTION (uint field)
defines the read, write, execute, and purge security used when creating disk
log files. The format of this word is:
0:3 = 0
4:6 = ID allowed for reading
7:9 = ID allowed for writing
10:12 = ID allowed for executing
13:15 = ID allowed for purging
Each field can have one of these values:
0 = Any local ID
1 = Local member of owner’s group
2 = Local owner
4 = Any ID
5 = Member of owner’s group (local or remote)
6 = Owner (local or remote)
7 = Local super ID only
ZCOL-EVENTBLOCKING (Boolean field)
if ON, tells a collector to write a number of messages to a buffer and then write
the entire group of messages to the log file. If OFF, it tells the collector to write
messages one at a time to the log file.
ZCOL-BURSTSUPDETECT
a value of TRUE (ZSPI-VAL-TRUE) specifies to the EMS collector that BDS
should be enabled. A value of FALSE (ZSPI-VAL-FALSE) indicates that BDS
should be disabled.
ZCOL-PRELOGFILTER
a value of TRUE (ZSPI-VAL-TRUE) specifies to the EMS collector that PLF
should be enabled. A value of FALSE (ZSPI-VAL-FALSE) indicates that PLF
should be disabled.
ZEMS-MAP-ACOL-CONTROL
is an extensible structured token that provides the value for the allocate control
options used with the alternate collector. This token has one field:
ZCOL-ALLOCATE (Boolean field)
if TRUE, causes the alternate collector to attempt to create and allocate
MAXFILE log files in the log subvolume. The range of file numbers created or