EMS Manual

Collector Event Messages
EMS Manual—426909-005
20-39
528: ZEMS-EVT-ACOL-ALLOCATESEG-ERR
ZEMS-TKN-CONSOLE-PRINT (shared)
is a standard EMS token. For more information, see Section 14, EMS Definitions.
Here, its value is TRUE.
ZEMS-TKN-GENTIME, -LOGTIME, -CPU, -PROC-DESC, -PIN, -NODENUM,
and -USERID
are standard EMS tokens. For more information, see Section 14, EMS Definitions.
ZEMS-TKN-SUBJECT-MARK (shared)
is the standard EMS token that immediately precedes each subject token. This
event message has two subject tokens:
ZEMS-TKN-COLLECTOR (nonshared)
specifies the collector type. This token can have only one value: ZEMS-SUBJ-
ACOLL (or 2).
ZEMS-TKN-FAILFILENAME (nonshared)
is the name of the swap volume.
ZEMS-TKN-ZFILERR (nonshared)
is the error code associated with an event. For an explanation of this error code,
see the Operator Messages Manual.
ZEMS-TKN-SEGALLOC-ERROR (nonshared)
is the type of allocation error. The different types are listed in Event Message Text
in the event message box for this event message.
Cause. An alternate collector process cannot allocate its extended data segment. The
collector does not attempt to write this event to its own log. The most likely cause is
lack of space on the alternate collector’s swap volume.
Effect. The alternate collector terminates abnormally after sending this event message
to the primary collector.
Recovery. Either run the alternate collector, specifying a different SWAP volume, or
make space available on the original volume.