EMS Manual

Collector Event Messages
EMS Manual—426909-005
20-58
538: ZEMS-EVT-BURST-START
ZEMS-TKN-GENTIME, -LOGTIME, -CPU, -PROC-DESC, -PIN, -NODENUM,
and -USERID
are standard EMS tokens. For more information, see Section 14, EMS Definitions.
ZEMS-TKN-SUBJECT-MARK (shared)
is the standard EMS token that immediately precedes each subject token. This
event message has one subject token:
ZEMS-TKN-COLLECTOR
is the EMS process type (value 1 for the primary collector; value 2 for an
alternate collector).
ZEMS-TKN-BURST-EVT-NUM
is the event number of the bursting event.
ZEMS-TKN-BURST-SSID
is the subsystem ID of the bursting event.
ZEMS-TKN-BURST-SUBJ-CODE
is the token code of the first subject in the bursting event.
ZEMS-TKN-BURST-SUBJ-VALUE
is the value of the first subject of the bursting event.
ZEMS-TKN-BURST-SUBJ-SSID
is the subsystem ID of the first subject of the bursting event.
ZEMS-TKN-BURST-TIME-START
is the Julian timestamp for the burst start time.
ZEMS-MAP-BDS-INFO
contains the burst detection and suppression (BDS) configuration parameters in
effect when the burst was detected.
Text Values
eventno
is from ZEMS-TKN-BURST-EVT-NUM.
ssid
is from ZEMS-TKN-BURST-SSID.