EMS Manual

Distributor Errors

EMS Manual—426909-005

21-20

1052: ZEMS-ERR-STATUS-ONLY

Cause. An application issued a CONTROL command, or an ADD, ALTER,

GETEVENT, or DELETE command to a consumer, printing, or forwarding distributor for

which it did not have permission or is in use by another user. Only info or status

commands are allowed for a secondary opener. Exceptions are the filter add/delete

commands, which are allowed for a super-group user or a user with the same access

ID as the distributor’s ID.

Effect. Access for this command is denied.

Recovery. Log on as the proper user to gain filter control access.

1059: ZEMS-ERR-MAXFLT

Cause. An ADD FILTER command was issued exceeding the maximum number of

filters (10).

Effect. The filter is not added.

Recovery. Remove filters to accommodate new filters.

1060: ZEMS-ERR-FLT-ALLOC

Cause. A resource for a filter could not be allocated, such as filter buffer or filter

parameter buffer. The failing filter name is displayed. An ADD FILTER command was

issued, but the combined resources for event source, destination, and filter parameter

buffers exceed the buffer pool size.

Effect. The filter is not added.

Recovery. Remove sources, destinations, or filters to allow room in the buffer pool.

ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL

ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL

ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST

ZEMS-TKN-FAILFILENAME token-type ZSPI-TYP-FNAME

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL