EMS Manual

Distributor Errors
EMS Manual—426909-005
21-21
1061: ZEMS-ERR-DIST-ALLOC
1061: ZEMS-ERR-DIST-ALLOC
Cause. An ADD FILTER command was issued to allocate a routing distributor
destination, such as a print buffer, but the combined resources for event source,
destination, and filter parameter buffers exceed the available buffer pool size.
Effect. The filter is not added.
Recovery. Remove sources, destinations, or filters to allow room in the buffer pool.
1062: ZEMS-ERR-INV-PROFILE
Cause. FORMAT ON was specified, and the destination is a collector or a process
that is set up for launching. The ADD FILTER command was issued.
Effect. The filter is not added.
Recovery. Set FORMAT to OFF.
1063: ZEMS-ERR-DEST-CONFLICT
Cause. A conflict between a destination profile and a runtime TEXTOUT specification
was detected when an ADD FILTER command was issued. A destination profile was
specified in the filter, and TEXTOUT was also given as a runtime parameter.
Effect. The filter is not added.
Recovery. Start the distributor without a TEXTOUT specification or delete the
destination profile in the filter.
ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST
ZEMS-TKN-FAILFILENAME token-type ZSPI-TYP-FNAME
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL
ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST
ZEMS-TKN-FAILFILENAME token-type ZSPI-TYP-FNAME
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL
ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL