EMS Manual

Collector Errors
EMS Manual—426909-005
22-12
1008: ZEMS-ERR-INV-OBJECT
ZEMS-TKN-FAILFILENAME (type fname; nonshared)
is the file name of a bad log file.
ZEMS-TKN-FAIL-REASON (type enum)
if caused by a filter table that would not convert to the object form, then the value
of this token contains the row and column of the first syntax error in the filter table.
The column is in the upper six bits; the row is in the lower ten bits.
ZEMS-TKN-FILTER-ERROR (type enum; nonshared)
is internal and private to HP.
ZEMS-TKN-ZOPR-NUM-FILTERS (type uint)
identifies the number of filters installed in the primary collector when $0 and
$ZOPR are not synchronized with respect to filter configuration data.
ZEMS-TKN-ZFILERR (type uint; nonshared)
is the error-code associated with a distributor ZSPI-TKN-ERROR value.
ZEMS-TKN-ZOPR-CMD (type enum; nonshared)
is internal and private to HP.
1008: ZEMS-ERR-INV-OBJECT
Cause. This error can be returned by a pre-D31 release collector for an object that it
does not support, which would be FILTER.
Effect. The desired action does not take place.
Recovery. Use a collector from the D31 RVUs or later.
1009: ZEMS-ERR-INV-CPU
Cause. A switch CPU command was issued, but the CPU number was not equal to
the backup CPU.
Effect. The switch does not take place.
Recovery. Specify the current backup’s CPU for the switch.
ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-ENUM
ZSPI-TKN-PARM-ERR token-type ZSPI-DDL-PARM-ERR
ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL