EMS Manual

Collector Errors

EMS Manual—426909-005

22-24

1015: ZEMS-ERR-REQ-TKN

Cause. The collector received a collector CONTROL command message that is

missing a required token. You must include at least one of these tokens: ZEMS-MAP-

COL-CONTROL-CDIST, ZEMS-MAP-COL-CONTROL, or ZEMS-TKN-CDISTPRICPU.

(ZEMS-MAP-COL-CONTROL-CDIST and ZEMS-TKN-CDISTPRICPU are mutually

exclusive; do not include both.)

Effect. The command is not executed.

Recovery. Make sure your command has all the required tokens it needs.

1017: ZEMS-ERR-INV-OCCURS

Cause. The collector received a command message request from an application

whose message buffer is not large enough to contain the entire command message.

Effect. The command is not executed.

Recovery. Fix the byte length of the WRITEREAD operation sending the command

message so that it fits within the buffer size, or increase the message buffer size.

1031: ZEMS-ERR-LOG-ACCESS

Cause. An I/O error occurred while the collector was accessing a log or ZZEVCONF

file.

Effect. The command that caused the I/O error does not execute completely.

Recovery. Examine the log or ZZEVCONF files to determine the cause of the I/O

problem.

ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL

ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL

ZSPI-TKN-ERRLIST token-type ZSPI-TYP-LIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZEMS-TKN-ZFILERR token-type ZSPI-TYP-UINT

ZEMS-TKN-FAILFILENAME token-type ZSPI-TYP-FNAME

ZSPI-TKN-ENDLIST token-type ZSPI-TYP-SSCTL