EMS Manual

EMS Manual—426909-005
C-1
C Standard Event Sample Files
This appendix provides three sample files, formerly available in InfoWay, that you can
copy and use on your system when creating standard events:
When viewing this appendix using the NonStop Technical Library (NTL), you can select
and copy the text of any of these sample files and paste it into a text editor. You can
then modify it for use on your system.
Event External Specification Sample File
You can use this sample file, formerly stored in InfoWay as stndevet.txt, as a basis for
creating your own subsystem event external specifications.
<<*************** GENERAL INSTRUCTIONS *************************
This is the sample Subsystem Event External Specification
file. It should be used in conjunction with, from the EMS
Manual, Section 10, Generating Standard Events. Guidelines
for writing a subsystem event ES are also discussed in Section
10; instructions for editing this file are provided in each
section below.
General instructions on the use of this file:
1. Copy this file to your subvolume and rename it to <ss>ES,
where <ss> is your subsystem acronym like ZSAM. Edit this
file to create your event ES.
2. Print a formatted copy of this document.
3. All instructions in this file are enclosed by "<< ... >>".
All text, including TFORM commands, enclosed by "<< ... >>"
should be deleted before publishing your document.
4. Do not change any of the TFORM macros or margins defined
here. If you do, you may get formatting errors.
5. Information in this document is presented in "tables"
whenever possible so that it is easy to scan and change
the information.
Use "tables" whenever you can to add your information.
Information in tables are enclosed in a box. The box is
defined by the custom TFORM macros "\my_box_on" and
"\my_box_off." Text inside the box will appear as you
Topic Page
Event External Specification Sample File
C-1
DDL Definitions Sample File C-20
EMS Templates Sample File C-30