EMS Manual
Standard Event Sample Files
EMS Manual—426909-005
C-5
Event External Specification Sample File
It lists the standard management functions, as defined in
Requirements for Standard Events on page 9-3, in the EMS Manual,
supported by this subsystem.
It describes in detail the private management functions, if any,
supported by this subsystem.
It lists the EMS event subjects -- in DDL names -- for all the
events generated by this subsystem.
It lists the EMS event types -- standard and private event types
-- that are generated by this subsystem.
It lists the EMS event messages -- with a brief description of
the event message -- that are generated by this subsystem.
The "Standard Management Functions Table" below lists all the
standard management functions supported by EMS events of this
subsystem.
<<All events generated by your subsystem must be for the support
of one of the management functions listed below. Replace "*"
with a blank character for the management function that your
subsystem does not support.
>>
* means the management function is supported by subsystem events
* Object State Monitoring Functions on page 9-4
* Reactive Problem Management Functions on page 9-5
* Proactive Problem Management Functions on page 9-8
* Production Requests Requiring Operator Attention on page 9-9
The "Private Management Functions Table" below lists all the
private (i.e., non-standard) management functions, if any,
supported by EMS events of this subsystem.
<<All events generated by your subsystem must be for the support
of one of the standard management functions listed earlier or
for one of these private management functions listed here.
If you are not supporting any private management function with
EMS events, state "none" here. Do not delete this subsection.
If you are supporting private management functions with EMS
events, list each function here.
>>
<<
For each function listed in the table above, provide a new
subsection below describing this function in detail. The type of
information that should be provided is described in Task 4.
Define Private Event Types for Your Subsystem on page 10-9, in
the EMS Manual.
Use these TFORM commands to define each of your subsections: