EMS Manual

Standard Event Sample Files
EMS Manual—426909-005
C-18
Event External Specification Sample File
ZEMS-TKN-CONTENT-STANDARD ZEMS-VAL-TRANSIENT-FAULT
ZEMS-TKN-CONTENT-USER <<specific value or blank>>
<<add your private unconditional tokens here.>>
Conditional Tokens Value
<<add your private conditional tokens here or state "None">>
Internal Tokens Value
<<add your internal tokens here or state "None">>
Event-Message Text
<<state "use standard display" if using display below; otherwise
specify your display (you must provide your Template in this
case).
Transient fault <1>, event number: <*>, fault type: <*>,
manager: <*>, batch ID>: <*>, user content: <2>
>>
<<describe cause of event here>>
<<describe effect of event on system here or state "None.">>
<<describe the recommended recovery action here or state
"Information only. No recovery action needed.">>
<<describe other considerations for event here or do not include
this heading>>
use this "template" to describe USAGE THRESHOLD type event
<<provide a brief description of your event here>>
ZEMS-TKN-SUBJECT-MARK <1> <<list subjects for event>>
ZEMS-TKN-CONTENT-STANDARD ZEMS-VAL-USAGE-THRESHOLD
ZEMS-TKN-CONTENT-USER <2> <<specific value or blank>>
<<add your private unconditional tokens here.>>
Conditional Tokens Value
<<add your private conditional tokens here or state "None">>
Internal Tokens Value
<<add your internal tokens here or state "None">>
Event-Message Text
<<state "use standard display" if using display below; otherwise
specify your display (you must provide your Template in this
case).
Usage threshold <1>, event number: <*>, usage level (current):
<*>, usage level (last reported): <*>, usage unit: <*>,
timestamp GMT (current): <*>, timestamp GMT (last reported):
<*>, configured usage level (high): <*>, configured usage level
(low): <*>, manager: <*>, batch ID>: <*>, user content: <2>
>>