ENABLE Reference Manual

ENABLE FUNCTION KEYS
Function Key Assignments
This section discusses the ENABLE function keys and the
operations assigned to each. Operations on T16-6510, T16-6520,
and T16-6530 terminal types are assigned to function keys 1
through 8, 10, 12, 14, and 16, and to shifted function keys 1, 2,
4, 5, 10, and 12 through 16. ENABLE reserves two function keys,
SF3 and SF6, for users.
Operations on the IBM-3270 terminal type are assigned to program
function keys 1 through 12 and program attention key 2. The
ENTER key serves as a shift key for eleven operations
corresponding to the shifted F1, F2, F3, F4, F5, F6, F10, F12,
F13, F14, and F15 keys.
To use these corresponding shifted functions on an IBM-3270
terminal, do the following:
1. Press the ENTER key first. The screen displays the word
SHIFT and the PF keys take on their secondary functions.
2. Press the appropriate PF key. It is not necessary to hold
the ENTER key down when the PF key is pressed. You can
cancel the effect of the ENTER key by pressing this key a
second time.
Table 8-1 briefly describes each function key, its ENABLE
template designation, and the operation that you can perform by
pressing the key.
8-2