ENABLE Reference Manual

SECTION 3
ENABLE COMMANDS
ENABLE commands permit you to control and describe objects within
the ENABLE subsystem. They allow you to specify attributes that
define two types of objects: applications and boxes. Refer to
Section 2 for more information about these objects.
This section describes the syntax of the ENABLE commands and the
function that each command performs. Generally, you use the
ENABLE commands as follows:
1. Use the SET command to establish values for the attributes
that describe the characteristics of an object.
2. Use the ADD command to name the object and add its
description to the object table.
3. Use the GENERATE command to generate the application after
you have added the associated application.
Refer to Figure 3-1 for specific guidelines to follow when you
use the ENABLE commands to generate a single-file application.
3-1