ENABLE User's Guide

USING AN ENABLE APPLICATION
DELETE BOX
DELETING RECORDS
You can delete only those records that are currently displayed on
the screen. To retrieve records that you want to delete, use any
suitable read operation. After you retrieve a record (or
records), you can request the following delete operations:
DELETE--to delete a single record
DELETE BOX--to delete several records
When you request a DELETE operation, you must position the cursor
within the record to be deleted. When you request a DELETE BOX
operation, you must position the cursor within the appropriate
box.
If you request a delete operation and then change your mind, you
can use the UNDO key (SF13) to replace the deleted record.
DELETE (F12)
If you want to delete a single record, request a DELETE
operation. To request a DELETE operation, do the following:
1. Perform any read operation to retrieve the record you want to
delete.
2. Position the cursor over the record you want to delete if
more than one record appears in the box.
3. Press F12 to delete the record.
DELETE BOX (Shifted F12)
If you want to delete several records at the same time, request a
DELETE BOX operation. You can only delete those records that
appear on the screen. To request a DELETE BOX operation, do the
following:
8-29