ENABLE User's Guide

RESOLVING PROBLEMS
Handling Problems With Extended Memory Overflow
2. Use the DELETE APPL command to delete all applications that
you have already generated. Use the DELETE BOX command to
delete all of the boxes associated with these applications.
You must delete an application before you can delete a box
used by the application.
3. If you have not generated any applications, you must delete
one or more applications (and the associated boxes) before
you can generate the remaining applications.
4. If several applications use the same boxes, deleting one or
more applications might not reclaim sufficient space. In
this case, you should:
--Use the OUT, INFO, and SHOW commands to obtain a listing of
the current contents of the object buffer.
--Exit from ENABLE.
--Increase the number of extended memory pages allocated by
entering the command Interpreter PARAM command and
specifying a value for the EXTPAGES parameter. (Refer to
the ENABLE Reference Manual for more information about this
parameter.)
--Restart ENABLE and generate your applications.
If you are using ENABLE noninteractively by entering commands in
a command file, you will not encounter this error until ENABLE
terminates with the following error message:
ENABLE tables overflow allocated extended memory
In this case, you should:
1. Increase the number of extended memory pages allocated by
entering the command Interpreter PARAM command to specify a
value for the EXTPAGES parameter.
2. Resubmit your command file to ENABLE.
9-2