ENABLE User's Guide

Sample Project-Tracking System
Modifying the PATHCOM Command File to Integrate the Applications
MODIFYING THE PATHCOM COMMAND FILE TO INTEGRATE THE APPLICATIONS
Figure 12-27 shows the PATHCOM command file created by ENABLE
when it generated the project-entry application. This figure
also indicates areas of the file that require modification.
-----------------------------------------------------------------
| |
| SET PATHMON BACKUPCPU 1 |
| SET PATHWAY MAXTCPS 10 |
| SET PATHWAY MAXTERMS 10 |
| SET PATHWAY MAXPROGRAMS 10 |
| SET PATHWAY MAXSERVERCLASSES 10 |
| SET PATHWAY MAXSERVERPROCESSES 10 |
| SET PATHWAY MAXSTARTUPS 10 |
| SET PATHWAY MAXPATHCOMS 40 |
| SET PATHWAY MAXASSIGNS 32 |
| SET PATHWAY MAXPARAMS 32 |
| START PATHWAY COLD! |
| |
| SET TCP PROGRAM $SYSTEM.SYSTEM.PATHTCP2 |
| SET TCP CPUS 0:1 |
| SET TCP MAXTERMS 5 |
| SET TCP MAXSERVERCLASSES 003 |
| SET TCP MAXSERVERPROCESSES 003 |
| SET TCP MAXTERMDATA 12036 <---- must be modified to |
| SET TCP MAXREPLY 02000 include enough data space |
| SET TCP NONSTOP 0 for all applications |
| SET TCP TCLPROG $DATA.SAMPLE.POBJ |
| ADD TCP ENABLE-TCP |
| |
| SET PROGRAM TCP ENABLE-TCP |
| SET PROGRAM TYPE T16-6520 INITIAL PROJECT-ENTRY <- must be |
| SET PROGRAM TMF OFF changed |
| ADD PROGRAM PROJECT-ENTRY <---------------------- to |
| ident- |
| RESET SERVER ASSIGN, PARAM ify the |
| menu |
| program |
| |
-----------------------------------------------------------------
Figure 12-27. PATHCOM Command File Before Modifications
(Continued next page)
12-54