ENABLE User's Guide

ENABLE Messages
Application Run-Time Error Messages
Table B-2. Application Run-Time Error Messages (Continued)
-----------------------------------------------------------------
| |
| Message Meaning |
|_______________________________________________________________|
| |
| Nothing to update. You tried to update a record |
| without previously reading |
| the record from the data |
| base. |
| |
| OPEN error: <file-name> The specified error occurred |
| File system error on open for the named file. |
| code = <err-code> Record the error and see your |
| data administrator. |
| |
| Printer requires attention. The printer is not ready. |
| |
| Program error: Corrupt The request to the General |
| data file info Server contains incorrect |
| information about a data file |
| that was previously opened |
| successfully by the same |
| requester. |
| |
| Record is locked The record you tried to read |
| has been locked by another |
| application. |
| |
| Record not found. The record you tried to read |
| does not exist in the data |
| base. |
| |
| Screen recovery. Some You either pressed the SCREEN |
| entries to this screen RECOVER key or a terminal I/O |
| may have been lost was detected and recovery was |
| successful. Values you |
| entered on the current screen |
| before the failure might have |
| to be re-entered. |
| |
| Selected function key is You requested an operation |
| not supported by this that is not supported by this |
| application. application, or you pressed a |
| function key that is not |
| assigned to an operation. |
| |
-----------------------------------------------------------------
B-28