Envoy ACP/XF Configuration and Management Manual

EnvoyACP/XF Configuration and Management Manual—429232-003
5-1
5
Subsystem Control Facility (SCF)
Commands for EnvoyACP/XF
This section describes SCF commands available for EnvoyACP/XF.
Table 5-1 identifies which SCF commands can be executed on which EnvoyACP/XF
objects.
Note. “CPU” and “processor” are used interchangeably in this section.
Table 5-1. SCF Commands and Object Types for EnvoyACP/XF
Command LINE Object PROCESS Object
ABORT Command
on page 5-2 X
ACTIVATE Command
on page 5-3 X
ALTER Command
on page 5-7 X
INFO Command
on page 5-19 X
START Command
on page 5-27 X
STATS Command
on page 5-29 X
STATUS Command
on page 5-31 X
STOP Command
on page 5-33 X
SUSPEND Command
on page 5-35 X
SWITCH Command
on page 5-35 X
TRACE Command
on page 5-37 X
VERSION Command
on page 5-40 X