Envoy ACP/XF Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
5-9
ALTER DEVICE Command
Examples
The following command alters the modifier TIMEOUT to its default value:
Example 5-5. ALTER DEVICE Command to Reset TIMEOUT Modifier
-> ALTER DEVICE $ZZWAN.#EXF01, RESET TIMEOUT
The following command alters the BUFFER modifier from POOLED to DEDICATED:
Considerations
•
You must use the STOP DEVICE command to stop the DEVICE object before you
can alter it.
•
You must issue a START DEVICE command to start the DEVICE object, which
must start the data communications subsystem object before you can use it.
Example 5-6. ALTER DEVICE Command to Alter BUFFER Modifier
-> ALTER DEVICE $ZZWAN.#EXF01, DEDICATED