Envoy ACP/XF Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
5-19
INFO Command
Considerations
•
You must stop the DEVICE object with the STOP DEVICE command before you
can delete it.
•
Only DEVICE objects that were added with the WAN subsystem ADD command
can be deleted.
INFO Command
The INFO command is a nonsensitive command that displays the static configuration
attribute values for a data communications subsystem object.
INFO DEVICE Command
Use the WAN subsystem INFO DEVICE command to display the static configuration
attribute values for a device object.
The command syntax is as follows:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
$ZZWAN.device-name
indicates the name of the DEVICE object in the configuration database and is also
the name of the corresponding data communications subsystem object, as
specified in the ADD DEVICE command. You can use the asterisk (*) to specify all
configured DEVICE objects.
ADAPTER
specify this attribute to display only the SWAN concentrator name.
CLIP
specify this attribute to display only the SWAN concentrator CLIP.
INFO [ , OUT file-spec ] DEVICE $ZZWAN.#device-name
[ , ADAPTER ]
[ , CLIP ]
[ , DETAIL ]
[ , IOPOBJECT ]
[ , LINE ]
[ , PATH ]
[ , PROFILE ]
[ , RECSIZE ]
[ , TYPE ]
[ , OBEYFORM ]