Envoy ACP/XF Configuration and Management Manual

EnvoyACP/XF Configuration and Management Manual—429232-003

About This Manual

This manual describes configuration of an EnvoyACP/XF subsystem running on a

NonStop S-series server or an Integrity NonStop NS-series server.

Who Should Use This Manual

This manual is intended primarily for system managers responsible for configuring and

managing EnvoyACP/XF. It also can be used for reference by application programmers

using EnvoyACP/XF to communicate over bit-synchronous communications lines.

How This Manual is Organized

This manual has the following sections:

Section and Title This Section...

1 Configuration Quick Start

Provides instructions for bringing up the

EnvoyACP/XF subsystem using an NRM

line.

2 Introduction to EnvoyACP/XF

Provides an introduction to EnvoyACP/XF.

3 WAN Subsystem Profiles and Modifiers

for EnvoyACP/XF

Describes the profiles and modifiers for

EnvoyACP/XF line configuration.

4 Subsystem Control Facility (SCF)

for EnvoyACP/XF

Provides an overview of the Subsystem

Control Facility (SCF) for EnvoyACP/XF.

5 Subsystem Control Facility (SCF)

Commands for EnvoyACP/XF

Provides command syntax and definitions

for EnvoyACP/XF SCF commands.

A Converting EnvoyACP/XF Configuration

Information to SCF

Compares CMI, COUP, and SYSGEN to

SCF.

B SCF Command Syntax Summary for

EnvoyACP/XF

Provides the command syntax for

EnvoyACP/XF commands.

C SCF Error Messages for EnvoyACP/XF

Describes the SCF error messages for

EnvoyACP/XF, including cause, effect and

recovery.

D PROFILE Displays

Shows the contents of the EnvoyACP/XF

profiles.

Glossary

Defines terms used in this manual.