Envoy ACP/XF Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
5-21
INFO DEVICE Command
Following are definitions for the display fields not defined under the command syntax:
Unit
is a logical entity that facilitates the configuration of MULTI lines. For more
information, refer to the information about full-duplex protocols in the
EnvoyACP/XF Application Programming Manual.
Alternate Cpu
indicates the number of the alternate CPU.
Preferred Cpu
indicates the number of the preferred CPU.
HIGHPIN
indicates whether the data communications subsystem object is to be run highpin
ON or OFF.
The format of the display for the INFO DEVICE command with the DETAIL option is
shown in Example 5-10.
Example 5-10 shows a partial list of device-specific modifiers. For more information,
refer to Section 3, WAN Subsystem Profiles and Modifiers for EnvoyACP/XF.
Example 5-10. INFO DEVICE, DETAIL Command
12-> info device #exf01,detail
WAN MANAGER Detailed Info Device \IDC12.$ZZWAN.#EXF01
*Adapter Name..... SWAN06 *Clip ............ 2
*Line ............ 0 *Path ............ A
Profile........... PEXFSDLC *RecSize.......... 512
Preferred Cpu..... 2 Alternate Cpu..... 3
*Type............. (11,40)
*HIGHPIN.......... ON
*IOPOBJECT........ \IDC12.$SYSTEM.SYS00.BSPROCO
DEVICE SPECIFIC MODIFIERS:
MAXLOCALAREA 2048
LOCALPOOLPAGES 60
CSMLDEV 0
.
.
.