Envoy ACP/XF Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
5-23
INFO LINE Command
OUT file-spec
causes any SCF output generated for this command to go to the specified file.
file-spec must be a partially or fully qualified file name. If you do not specify this
option, the output goes to the home terminal.
object-name
is the name of the line for which you are requesting information.
See the attribute definitions for the ALTER command starting with ABMSETP on
page 5-11.
Examples
Example 5-11 displays some configuration attributes for the line $ACPXF. (An asterisk
denotes alterable attributes.)
Station
indicates whether the station is primary or secondary.
Program
indicates the name of the downloadable module for the ServerNet WAN
concentrator.
Example 5-12 displays all the configuration attributes for the line $ACPXF. (An asterisk
denotes alterable attributes.)
Example 5-11. INFO LINE Command
12-> INFO LINE $ACPXF
Envoy ACP/XF INFO LINE
Name Type *Station *Program
$ACPXF 11,40 Primary $SYSTEM.CSS01.C8169P00
Default SECONDARY
Range PRIMARY | SECONDARY
Default C8169P00
Range Not applicable