Envoy ACP/XF Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
5-31
STATUS Command
Line Path Errors
shows the number of line errors at the LIU level.
STATUS Command
The STATUS command is a nonsensitive command that is used to display current
status and configuration information for a specified object.
STATUS DEVICE Command
The WAN subsystem STATUS DEVICE command displays current status and
configuration information about a data communications subsystem object.
The command syntax is as follows:
$ZZWAN.#device-name
indicates the name of the DEVICE object in the configuration database and is also
the name of the corresponding data communications subsystem object, as
specified in the ADD DEVICE command. You can use the asterisk (*) to specify all
configured DEVICE objects.
Example
The format of the display for the STATUS DEVICE command is shown in
Example 5-20.
State
is the current summary state of the LINE object.
STATUS LINE Command
The STATUS LINE command is a nonsensitive command that displays the state of a
line and the primary/backup processors for the associated line handler process
STATUS DEVICE $ZZWAN.#device-name
Example 5-20. STATUS DEVICE Command
24-> status device #exf01
WAN Manager STATUS DEVICE for DEVICE \IDC12.$ZZWAN.#EXF01
State :......... STOPPED
STATUS [ / OUT file-spec / ] LINE object-name
[ , DETAIL ]