Envoy ACP/XF Configuration and Management Manual

Subsystem Control Facility (SCF) Commands for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
5-32
STATUS LINE Command
OUT file-spec
causes any SCF output generated for this command to go to the specified file.
file-spec must be a partially or fully qualified file name. If you do not specify this
option, the output goes to the home terminal.
object-name
is the name of the line for which you are requesting status information.
Example 5-21 displays the status of the LINE object $ACPXF.
With the DETAIL option specified, Example 5-22 includes statistical information for the
line.
Backup Trace
indicates whether the backup process is being traced.
BPID
is the processor number and PIN of backup EnvoyACP/XF process.
ConMgr Ldev
is the logical device number of the concentrator manager process running in the
primary processor.
IP Address
is the address of the primary EnvoyACP/XF process.
Example 5-21. STATUS LINE Command
12-> STATUS LINE $ACPXF
Envoy ACP/XF Status Line
Name State SWAN Line IP Address LDEV PPID BPID
$ACPXF STARTED SWAN37.1.O 150.186.059.050 168 02,292 03,272
Example 5-22. STATUS LINE, DETAIL Command
13-> STATUS LINE $ACPXF,DETAIL
Envoy ACP/XF Detailed Status Line \SYS1.$ACPXF
State................ STARTED Ldev................. 11
PPID................. (2,229) BPID................(3,372)
Path................. A ConMgr Ldev.......... 30
SWAN LINE............ SWAN27.1.0 IP ADDRESS..155.186.059.050
Primary Trace........ OFF Backup Trace......... OFF