Envoy ACP/XF Configuration and Management Manual

EnvoyACP/XF Configuration and Management Manual—429232-003
A-1
A
Converting EnvoyACP/XF
Configuration Information to SCF
This appendix describes how to convert the following configuration files from D-series
releases to G-series releases.
In addition to this appendix, the following conversion information is available to help
you:
•
The MIGSCF program can automatically convert to SCF any COUP commands
entered at the TACL prompt or found within a command or OBEY file. MIGSCF
documentation can be found in an appendix of the SCF Reference Manual for
G-Series RVUs, or at $SYSTEM.ZMIGSCF.MANUAL (a TEDIT file).
•
If you enter a COUP command from within SCF, SCF displays information to help
you convert the command to its SCF equivalent.
Table A-1 compares the capabilities of all the above tools on D-series and G-series
RVUs.
D-Series File G-Series File Subsection
CMI command file SCF command file CMI-to-SCF Conversion Guide
on page A-2
COUP command file SCF command file COUP-to-SCF Conversion Guide
on page A-3
SYSGEN
CONFTEXT file
SCF command file SYSGEN-to-SCF Conversion Guide
on
page A-23
Table A-1. Configuration Programs for D-Series and G-Series RVUs (page 1 of 2)
D-Series RVUs G-Series RVUs
Capability SYSGENR COUP CMI SYSGENR
SCF to
WAN
Sub-
system
SCF to
EnvoyACP/XF
Can update the
system
configuration
database
(1)
Yes Yes No Yes Yes No
Can change the
configuration of a
running system
No Yes Yes
(2)
No Yes
(2)
Yes
(2)
Can be used on
objects configured
by COUP
Yes Yes Yes
(2)
N.A. N.A. N.A.