Envoy ACP/XF Configuration and Management Manual

Converting EnvoyACP/XF Configuration Information
to SCF
EnvoyACP/XF Configuration and Management Manual—429232-003
A-4
Default Values for COUP Macros
Default Values for COUP Macros
Table A-4 correlates D-series COUP macros with G-series WAN subsystem profiles for
EnvoyACP/XF.
Comparing the ADCCPABMXF Macro to the PEXFAABM Profile
Table A-5 matches the default D-series COUP modifiers and values for the
ADCCPABMXF macro to the corresponding default G-series attributes and values for
the PEXFAABM profile.
Table A-3. Comparison of COUP and SCF Object Types
COUP Object Type SCF Subsystem SCF Object Type
CONTROLLER no conversion
DEVICE WAN DEVICE
PATH no conversion
Table A-4. COUP Macro-to-Profile Correlation
D-Series Macro G-Series Profile Subtype Table Number
Page
Number
ADCCPABMXF PEXFAABM 42 Table A-5
A-4
ADCCPNRMXF PEXFANRM 42 Table A-6
A-8
HDLCXF PEXFHDLC 41 Table A-7
A-12
SDLCXF PEXFSDLC 40 Table A-8
A-15
Table A-5. COUP ADCCPABMXF Macro Comparison to the PEXFAABM Profile
(page 1 of 5)
D-Series COUP Modifier
D-Series
Default Value G-Series SCF Attribute
G-Series
Default Value
ABM/NRM ABM ABM/NRM ABM
ABMSETP/NOABMSETP NOABMSETP ABMSETP/NOABMSETP NOABMSETP
ACI1/NOACI1 NOACI1 None None
ADDRESS1 1 ADDRESS1 1
ADDRESS2 3 ADDRESS2 3
ADDRESS3 0 ADDRESS3 0
ADDRESS4 0 ADDRESS4 0
ADDRESSSIZE 1 ADDRESSSIZE 1
* This SCF attribute is required on G-series releases.
** This SCF attribute is specified in the DEVICE object in the WAN subsystem. See the WAN Subsystem
Configuration and Management Manual for more information.