Envoy ACP/XF Configuration and Management Manual

Converting EnvoyACP/XF Configuration Information
to SCF
EnvoyACP/XF Configuration and Management Manual—429232-003
A-23
SYSGEN-to-SCF Conversion Guide
SYSGEN-to-SCF Conversion Guide
For the G01.00 release, most devices are preconfigured. This subsection explains, for
those processes that you can configure, how D-series CONFTEXT paragraphs
correspond to G-series SCF object types for the EnvoyACP/XF subsystem.
CONFTEXT Paragraph Conversion
Table A-10 correlates D-series CONFTEXT paragraphs with their corresponding
G-series SCF object types. Because you use the WAN subsystem to configure these
G-series object types, objects are permanent, that is, they survive system load and
processor reload. The table rows follow the same order in which you would specify
multiple SCF ADD commands to create the configuration.
Table A-10. Comparing CONFTEXT Paragraph to WAN Subsystem Object Type
CONFTEXT Paragraph
WAN
Subsystem
Object Type Function
DEFINES paragraph PROFILE Customizes a profile to be used later
when configuring DEVICE object type
CONTROLLERS paragraph ADAPTER Configures a 6-port SWAN concentrator
and a 12-port SWAN 2 conentrator
SERVER Configures a CLIP (up to 3 per
concentrator)
PATHS paragraph PATH Configures an Ethernet port (up to 2 per
CLIP)
TASK Configures a DLC task running in a
CLIP (2 per CLIP)
PERIPHERALS paragraph DEVICE To configure line handlers, service
managers, and so forth (up to 300 per
system)