Envoy ACP/XF Configuration and Management Manual

Converting EnvoyACP/XF Configuration Information
to SCF
EnvoyACP/XF Configuration and Management Manual—429232-003
A-24
Default Values for SYSGEN Macros
Default Values for SYSGEN Macros
Table A-11 correlates D-series SYSGEN macros with G-series WAN subsystem
profiles for the EnvoyACP/XF subsystem.
SYSGEN Conversion Examples
The following examples show how a SYSGEN configuration file converts to an SCF
configuration file. These configurations assume that the following objects are already
added and started:
•
$ZZWAN, the WAN subsystem manager process
•
A configuration manager process for the EnvoyACP/XF subsystem
•
A WANBoot process for the TCP/IP lines
•
A SWAN adapter for the $ZTC2 TCP/IP line
•
A server object for each of the three CLIPs on the SWAN concentrator
•
Six TCP/IP paths, one for each line on each CLIP
Table A-11. SYSGEN Macro-to-Profile Correlation
D-Series Macro
G-Series
Profile SCF Attributes and Default Values
ADCCPABMXF PEXFAABM Same as Table A-5
on page A-4.
ADCCPNRMXF PEXFANRM Same as Table A-6
on page A-8.
HDLCXF PEXFHDLC Same as Table A-7
on page A-12.
SDLCXF PEXFSDLC Same as Table A-8
on page A-15.