Envoy ACP/XF Configuration and Management Manual

Converting EnvoyACP/XF Configuration Information
to SCF
EnvoyACP/XF Configuration and Management Manual—429232-003
A-25
SYSGEN Conversion Examples
Example 2
The following SYSGEN configuration for an SDLC line attached to a 6110 controller is
equivalent to the following SCF command:
SYSGEN File
Defines:
C3651^SDLC = SDLCXF TYPE 11, SUBTYPE 40,
INTERRUPT BS^6100^INTERRUPT^XF,
RSIZE 128, FULL #;
Controllers:
CIU1 6110 00,01 %020;
CIU2 6110 01,00 %120;
Paths:
CSSA1 CIU1-CIU2 ALTERNATE_PATH CSSB1;
CSSA1 CIU1-CIU2 ALTERNATE_PATH CSSB1,
CLIP_4 1,2,3,4,5,6,7,8,9,10,11,
12,13,14,15;
Peripherals:
$CSM1 CSSA1.0 CSM TYPE 50, SUBTYPE 0, RSIZE 128;
$CLIP14 CSSA1.14 C3651^SDLC;
SCF Commands
-> ASSUME SUBSYS $ZZWAN
-> ADD PROFILE #PROFSDLC2, FILE $SYSTEM.SYSnn.PEXFSDLC, ->
ADD DEVICE #CLIP14, CPU 0, ALTCPU 1, PROFILE PROFSDLC2,
IOPOBJECT $SYSTEM.SYSnn.BSPROCO, TYPE (11,40), PROGRAM
$SYSTEM.SYS.C8169P00, RECSIZE 128, ADAPTER SWAN001A, CLIP n,
LINE n, PATH x, SECONDARY
-> START DEVICE #SDLC1A
For SWAN hardware clip-num will be 1 to 3. For SWAN 2 hardware clip-num will be 1
to 6.