Envoy ACP/XF Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for

EnvoyACP/XF

EnvoyACP/XF Configuration and Management Manual—429232-003

3-3

Modifiers That Can Be Changed

You can set or change most optional modifiers by using SCF commands to the

EnvoyACP/XF subsystem or by issuing a SETMODE procedure call in an application;

however, some modifiers require that you use SCF commands to the WAN subsystem.

Table 3-2 summarizes how to change optional modifiers and provides a cross-

reference to the page (in this section) containing the modifier description. Modifiers that

you cannot change through the WAN subsystem profiles are not listed; you can find

those modifiers described (as line attributes) in Section 5, Subsystem Control Facility

(SCF) Commands for EnvoyACP/XF. The EnvoyACP/XF Application Programming

Manual describes the SETMODE procedure calls referred to in column 4.

NRM Station

Configuration/

Transmission

Control

BDCASTON/BDCASTOFF, IDLETIMER, MAXPUS, NRM,

OPTION1/NOOPTION1, OPTION2/NOOPTION2, PRIMARY,

SECONDARY, T1TIMER

ABM Station

Configuration/

Transmission

Control

ABM, ABMSETP, IDLECMDRR, IDLERESPRR, IDLETIMER,

L2HEARTBEAT, T1TIMER

SDLC-Specific AUTOTESTRESP/NOAUTOTESTRESP,

IBMEXTENDED/NOIBMEXTENDED

NRME-Specific EXTENDEDCONTROL, SREJ

Table 3-1. Modifiers by Functional Category (page 2 of 2)

Functional

Category Modifier Names