Envoy ACP/XF Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
3-5
Modifiers That Can Be Changed
FULL/HALF ( on page 3-17) X X(DUPLEX
1
)16
IBMEXTENDED/
NOIBMEXTENDED ( on
page 3-17)
X
IDLECMDRR/
IDLERESPRR ( on
page 3-18)
XX 16
IDLETIMER ( on page 3-19) X X 16
IOPAGES ( on page 3-21) X
L1RETRY ( on page 3-21) X X
L2HEARTBEAT/
NOL2HEARTBEAT ( on
page 3-22)
X X 16 or 19
L2RETRY ( on page 3-23) X X 15
L2WINDOW ( on
page 3-23)
XX 18
LOCALPOOLPAGES ( on
page 3-24)
X
MAXPUS ( on page 3-24) X
MODEMLOSSFATAL/
NOMODEMLOSSFATAL
( on page 3-25)
XX
MODEMTIMER ( on
page 3-25)
X
OPTION1/NOOPTION1
( on page 3-27)
X
OPTION2/NOOPTION2
( on page 3-30)
X
OPTION6 X
Table 3-2. Changing Optional Modifiers (page 2 of 4)
Modifier/Attribute and
Page Number
Profile Modifier
Changeable
Through SCF
Commands to
the WAN
Manager
Line Attribute
Changeable Through
SCF Commands to
EnvoyACP/XF
Line Attribute
Changeable
Through
SETMODE
Procedure
Function
Number
1. EnvoyACP/XF SCF attribute names are indicated in parentheses when they differ from the WAN subsystem
SCF names. See Section 4, Subsystem Control Facility (SCF) for EnvoyACP/XF
and Section 5, Subsystem
Control Facility (SCF) Commands for EnvoyACP/XF for details.
2. FRAMESIZE can take a value less than the PROFILE value; however, FRAMESIZE cannot take a value
greater than the PROFILE value.
3. The SUPR modifier is the same as the PRIMARY modifier.
4. The TRIB modifier is the same as the SECONDARY modifier.