Envoy ACP/XF Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
3-7
Optional Modifier Descriptions
Optional Modifier Descriptions
The following alphabetical list describes the optional modifiers listed in Table 3-2.
Default values are provided for the profiles associated with each communications
protocol (such as profile PEXFAABM for protocol ADCCP-ABM). When the default
values differ depending on the protocol, the descriptions provide the default values for
each profile; a single default value listed in the description means that all profiles have
that default value.
TRANSLATE ( on
page 3-45)
X19
TRIB
4
( on page 3-45) X 16
TRNSLENGTH ( on
page 3-45)
X X(XLATELENGTH
1
)19
TRNSOFFSET ( on
page 3-46)
X X(XLATEOFFSET
1
)19
TWA/TWS ( on page 3-46) X X
V25/NOV25 ( on page 3-47) X X
XFERTIMER ( on
page 3-47)
XX
XPAGES ( on page 3-48) X
X21/NOX21 ( on page 3-48) X X
Table 3-2. Changing Optional Modifiers (page 4 of 4)
Modifier/Attribute and
Page Number
Profile Modifier
Changeable
Through SCF
Commands to
the WAN
Manager
Line Attribute
Changeable Through
SCF Commands to
EnvoyACP/XF
Line Attribute
Changeable
Through
SETMODE
Procedure
Function
Number
1. EnvoyACP/XF SCF attribute names are indicated in parentheses when they differ from the WAN subsystem
SCF names. See Section 4, Subsystem Control Facility (SCF) for EnvoyACP/XF
and Section 5, Subsystem
Control Facility (SCF) Commands for EnvoyACP/XF for details.
2. FRAMESIZE can take a value less than the PROFILE value; however, FRAMESIZE cannot take a value
greater than the PROFILE value.
3. The SUPR modifier is the same as the PRIMARY modifier.
4. The TRIB modifier is the same as the SECONDARY modifier.