Envoy ACP/XF Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
3-24
Optional Modifier Descriptions
LOCALPOOLPAGES
Specifies the number of pages that the line uses for its local pool. The local pool
provides space for data and trace buffers. The default value is 60 pages; however,
EnvoyACP/XF automatically allocates additional local pool pages as needed.
Do not specify this modifier; allow EnvoyACP/XF to allocate pages as necessary.
MAXLOCALAREAn
This modifier specifies the maximum local pool size in words.
MAXPUS
Specifies the maximum number of stations that can be addressed for this line. Define a
value greater than the current number of stations configured for the line.
MAXPUS determines the maximum number of station addresses that the user
application can specify through the DEFINELIST procedure call.
EnvoyACP/XF uses the value specified for MAXPUS to determine how much I/O buffer
space must be reserved.
You cannot alter this modifier by issuing a SETMODE procedure in an application or by
issuing an SCF ALTER LINE command to the EnvoyACP/XF subsystem.
Default 60
Units Pages (1024 words per page)
Range 2 through 127 pages
Caution. If you do specify this modifier, the value you indicate overrides both the default value
and the dynamic allocation of pages by EnvoyACP/XF.
Default 2048
Units: words
Range: 2048 through 32767
Default: 1
Units: Stations (PUs)
Range: 1 through 254
See
also:
IOPAGES
For a primary
station
MAXPUS indicates the maximum number of stations that can
be addressed by that station.
For a secondary or
tributary station
MAXPUS indicates the maximum number of substations that
the station can represent.