Envoy ACP/XF Configuration and Management Manual

WAN Subsystem Profiles and Modifiers for
EnvoyACP/XF
EnvoyACP/XF Configuration and Management Manual—429232-003
3-40
Optional Modifier Descriptions
STATISTICSON/STATISTICSOFF
STATISTICSON modifier specifies the routing of statistics messages for the line;
STATISTICSOFF deactivates the routing of statistics messages for the line.
SUPR/TRIB
Specifies that the line is a multipoint supervisor. This modifier has the same effect as
the PRIMARY modifier (SUPR and PRIMARY are synonymous).
You can set or override this modifier by issuing a SETMODE 16 call in an application
or by issuing an SCF ALTER LINE command to the EnvoyACP/XF subsystem (note
that the SUPR modifier is called station in the EnvoyACP/XF subsystem SCF product
module).
SWINCARRIER/NOSWINCARRIER
Specifies that the carrier detect (CD) signal is expected to rise before a remote station
starts a transmission, and is expected to drop when the remote station completes a
transmission. The setting of SWINCARRIER is determined by the line protocol
automatically.
When SWINCARRIER is not set, the carrier detect signal is not monitored.
A primary station that has a multipoint configuration requires SWINCARRIER to notify
it that a tributary station is transmitting. A tributary station does not require
SWINCARRIER, because the carrier-detect (CD) signal from the primary station is
always on.
Default: STATISTICSOFF
Units: N/A
Range: N/A
Alternate
modifier:
STATISTICSOFF or STATISTICSON
Default: SUPR
Units: N/A
Range: N/A
Note: Only for NRM.
See
also:
TRIB
Default: NOSWINCARRIER (for PEXFHDLC, PEXFAABM)
SWINCARRIER (for PEXFSDLC, PEXFANRM)
Units: N/A
Range: N/A